Main Water Valve Closure: What You Need to Know
Main Water Valve Closure: What You Need to Know
Blog Article
Have you been hunting for facts and techniques on How to Turn off the Water for Plumbing Repairs?
One of the most typical locations a water main will be located in home is in your boiler room, cellar, or a removed panel in an area for your house.
Once you locate the water pipe you will just turn the shutoff clockwise to shut all the water off in your home until you have completed the fixing. Some houses will certainly have a ball valve with a lever that you can pull rather than rely on close the water off.
If you try to close the water off to your components by utilizing an angle quit which doesn't function you will need to shut of the water pipe to make your repair service. There are also lots of other reasons you may require to close the water pipe like repairing frozen pipelines, repairing leaks, changing components or faucets.
Lots of people are not mindful that they also have a water main valve right in their own home as well as simply call a plumber of never ever end up doing the repair until things get really bad since they just do not know that shutting the water main is actually very easy.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
I am just very interested in How to Locate & Turn Off Main Water Shut-Off Valves and I am praying you liked the new post. Don't hesitate to take the time to promote this post if you liked it. Thank-you for taking the time to read it.
Rely on our service. Report this page